| 
                         每次装好Ubuntu,对于大多数用户来说,首先要做的事就是手动修改/etc/apt/sources.list文件,将里面的官方软件源地址更换为自己学校或者公司的软件源。当我们更换一个工作环境后,可能伴随着又要替换旧的软件源地址。 
笔者觉得这样每次手动更改软件源是一件及其麻烦重复的劳动,于是编写了一个自动更新最快软件源的脚本,从此一劳永逸。 
原理 
最直观的想法就是:对各个软件源进行测速,选出最快的那个,之后将其替换为新的软件源。 
那么如何对各个软件源测速呢?有两种方法: 
一、用ping命令 测量其平均响应时间 选出响应时间最短的那个 
二、用wget命令 测量下载一个文件的总时间 选出耗时最少的那个 
那么这两种方法有什么区别呢?我们该用哪个呢? 
前者选出的是响应时间最优的,后者选出的是下载速度最快的。我们都知道软件源的作用是供客户端下载更新软件,所以当然是后者的方法更为准确,但笔者最终选择了前者作为测速方案,因为前者的用户体验更好且代码简单易懂。设想,如果我们采用后者,那么需要从每个软件源下载一个文件,并且这个文件不能太小,否则无法区分他们的速度,那么一个显而易见的情况是脚本需要运行较长的时间。 
虽然存在某些软件源可能响应时间很短,而下载速度却很慢的情况,但经过笔者的多次实验,发现这样的情况并不常见。 
实现 
首先测试用户网络状态 
利用 
复制代码 代码如下: 
local speed=`ping -W1 -c1 www.baidu.com 2> /dev/null | grep "^rtt" |  cut -d '/' -f5` 
 
取出其平均响应时间 如果speed == “” 则说明网络不通,提示用户,且退出程序。 否则,说明网络正常,继续执行。 
检测软件源列表文件是否存在 
复制代码 代码如下: 
test -f $SOURCES_MIRRORS_FILE 
 
若不存在,提示用户,且退出程序。 
对每个软件源地址进行测速 
在测速之前清空上次运行的测速结果文件,之后将每个软件源的测速结果(源地址 平均响应时间)写入测速结果文件 
对测速结果进行排序 
复制代码 代码如下: 
sort -k 2 -n -o $MIRRORS_SPEED_FILE $MIRRORS_SPEED_FILE 
 
对每行记录 按照平均响应时间升序排列 
选出最快的软件源 
复制代码 代码如下: 
head -n 1 $MIRRORS_SPEED_FILE | cut -d ' ' -f1 ` 
 
通过取已排序列表中的第一条,选出最快的软件源 
询问用户是否要使用该软件源 
用户确认后,先对用户之前的软件源进行备份,然后再替换。 
getfastmirror.sh脚本源代码: 
复制代码 代码如下: 
#!/bin/bash 
#Program: 
#    This program gets the fastest ubuntu software sources from SOURCES_MIRRORS_FILE 
#    and backup && update /etc/apt/sources.list 
#Author:  KJlmfe    www.freepanda.me 
#History: 
#    2012/12/6    KJlmfe    First release 
 
VERSION="precise"  # precise is code of Ubuntu 12.04 if your ubuntu is not 12.04 please change 
TEST_NETCONNECT_HOST="www.baidu.com" 
SOURCES_MIRRORS_FILE="sources_mirrors.list"     
MIRRORS_SPEED_FILE="mirrors_speed.list" 
function get_ping_speed()    #return average ping $1 time 
{ 
    local speed=`ping -W1 -c1 $1 2> /dev/null | grep "^rtt" |  cut -d '/' -f5` 
    echo $speed 
} 
function test_mirror_speed()    # 
{ 
    rm $MIRRORS_SPEED_FILE 2> /dev/null; touch $MIRRORS_SPEED_FILE 
     
     cat $SOURCES_MIRRORS_FILE | while read mirror 
    do 
        if [ "$mirror" != "" ]; then 
            echo -e "Ping $mirror c" 
            local mirror_host=`echo $mirror | cut -d '/' -f3`    #change mirror_url to host 
     
            local speed=$(get_ping_speed $mirror_host) 
     
            if [ "$speed" != "" ]; then 
                echo "Time is $speed" 
                echo "$mirror $speed" >> $MIRRORS_SPEED_FILE 
            else 
                echo "Connected failed." 
            fi 
        fi 
    done 
} 
function get_fast_mirror() 
{ 
    sort -k 2 -n -o $MIRRORS_SPEED_FILE $MIRRORS_SPEED_FILE 
    local fast_mirror=`head -n 1 $MIRRORS_SPEED_FILE | cut -d ' ' -f1` 
    echo $fast_mirror 
} 
function backup_sources() 
{ 
    echo -e "Backup your sources.list.n" 
    sudo mv /etc/apt/sources.list /etc/apt/sources.list.`date +%F-%R:%S` 
} 
function update_sources() 
{ 
    local COMP="main restricted universe multiverse" 
    local mirror="$1" 
    local tmp=$(mktemp) 
    echo "deb $mirror $VERSION $COMP" >> $tmp 
    echo "deb $mirror $VERSION-updates $COMP" >> $tmp 
    echo "deb $mirror $VERSION-backports $COMP" >> $tmp  
    echo "deb $mirror $VERSION-security $COMP" >> $tmp 
    echo "deb $mirror $VERSION-proposed $COMP" >> $tmp 
    echo "deb-src $mirror $VERSION $COMP" >> $tmp  
    echo "deb-src $mirror $VERSION-updates $COMP" >> $tmp  
    echo "deb-src $mirror $VERSION-backports $COMP" >> $tmp  
    echo "deb-src $mirror $VERSION-security $COMP" >> $tmp  
    echo "deb-src $mirror $VERSION-proposed $COMP" >> $tmp 
    sudo mv "$tmp" /etc/apt/sources.list 
    echo -e "Your sources has been updated,and maybe you want to run "sudo apt-get update" now.n"; 
} 
echo -e "nTesting the network connection.nPlease wait...   c" 
if [ "$(get_ping_speed $TEST_NETCONNECT_HOST)" == "" ]; then 
    echo -e "Network is bad.nPlease check your network."; exit 1 
else 
    echo -e "Network is good.n" 
    test -f $SOURCES_MIRRORS_FILE 
    if [ "$?" != "0" ]; then   
        echo -e "$SOURCES_MIRRORS_FILE is not exist.n"; exit 2 
    else 
        test_mirror_speed 
        fast_mirror=$(get_fast_mirror) 
        if [ "$fast_mirror" == "" ]; then 
            echo -e "Can't find the fastest software sources. Please check your $SOURCES_MIRRORS_FILEn" 
            exit 0 
        fi 
        echo -e "n$fast_mirror is the fastest software sources. Do you want to use it? [y/n] c"     
        read choice 
        if [ "$choice" != "y" ]; then 
            exit 0 
        fi 
        backup_sources 
        update_sources $fast_mirror 
    fi 
fi 
exit 0  
 
sources_mirrors.list源码: 
复制代码 代码如下: 
http://cn.archive.ubuntu.com/ubuntu/ 
http://run.hit.edu.cn/ubuntu/ 
http://mirrors.sohu.com/ubuntu/ 
http://mirrors.163.com/ubuntu/ 
http://mirrors.tuna.tsinghua.edu.cn/ubuntu/ 
http://mirrors.ustc.edu.cn/ubuntu/ 
http://mirrors.yun-idc.com/ubuntu/ 
http://ubuntu.cn99.com/ubuntu/ 
 
            
            
您可能感兴趣的文章:                        (编辑:莱芜站长网) 
【声明】本站内容均来自网络,其相关言论仅代表作者个人观点,不代表本站立场。若无意侵犯到您的权利,请及时与联系站长删除相关内容! 
                     |